This is a very simple circuit that can indicate the last action taken on a Momentary Switch. An example of this is if you are using a momentary toggle switch to control the points on a Model Rail Layout. This circuit will latch on an Indicator when the switch is used, that indicator will remain ON when the switch returns to the centre OFF position. When the switch is used in the down momentary position the first indicator will switch OFF and the second Indicator will switch ON, and remain like that even when the switch returns to the centre OFF position.
Now voltages: The circuit is capable of accepting a range of voltages.
Coil 1 – C1 = 9v to 16v ACDC,
Coil 2 – C2 = 9v to 16v ACDC,
The Relay contacts will handle 2 Amps upto 30vDC ( A suggestion fix the circuit board near the points it is controlling, then run a 6 core cable back to the Control Panel for Indicators and the toggle switch, this assumes you have a 0v (Black) Bus Bar.)
Under no circumstances run a CDU through the relay contacts, the relay will fail.
Equivalent to the Gaugemaster Universal Relay Switch GM-500
A few of its applications:
Points Indicator. Points, Signal Control.
Home & Distant Signal Control Control Panel Display
Automatic Points Switch Automatic Shuttle Control
Station Stop Manual Start Running Lights
Siding Occupied Indication Train Blocking
Common Rail Control Electro Frog Points
Isolation of Track Reversing Loop Control
Reversing Figure 8 Control Siding Isolation
Automatic Reversing
Replaces the function of a Peco PL15 twin micro switch
To name a few:...
top of page
La note est de 0.0 sur cinq étoiles sur la base des avis
SKU : MR204e
5,64£Prix
Articles similaires
Leave a Review below for all to see or Contact us here
bottom of page